Material Testing
Here at Mix 14 we carry out rigorous burns testing on a range of aerospace products. We specialise in a 48hr turn around for all test pieces, including a 7 day a week service.
FAA/EASA Flammability Testing
- 12 second vertical burns IAW: CS/
FAA 25.853 Appendix F Part 1 (a) (1)
(ii)
- 60 second vertical burns IAW: CS/
FAA 25.853 Appendix F Part 1(a) (1)
(i)
- Oil burner for seat cushions burns
test IAW: CS/FAA 25.853 Appendix F
Part 2
- 15 second horizontal burn test IAW
CS/FAA 25.853 Appendix F Part 1 (a)
(1) (iv)
- 30 second, 60 degree burn test: CS/FAA 25.1713(c) Appendix F Part 1(a)(3)&(b)(7)
- 60 second, 45 degree single wire burn test: IEC 60332-1-2, Edition 1-1 2015-07.45
ASTM Standards Testing
- ASTM 5868-01(2014) Lap shear
adhesion for FRP Bonding
- ASTM 790D Flex and modulus
ASTM 638-14 Tensile properties of
plastics
- ASTM D1876-08 T Peel test
- Shore D hardness testing
Our pricing structure
Flammability Testing
12 second vertical burns IAW: CS/FAA 25.853 Appendix F Part 1 (a) (1) (ii)
60 second vertical burns IAW: CS/FAA 25.853 Appendix F Part 1(a) (1) (i)
15 second horizontal burn test IAW CS/FAA 25.853 Appendix F Part 1 (a)(1) (iv)
30 second, 60 degree burn test: CS/FAA 25.1713(c) Appendix F Part 1(a)(3)&(b)(7)
60 second, 45 degree single wire burn test: IEC 60332-1-2, Edition 1-1 2015-07.45
From £45 per test
Oil burner for seat cushions burns test IAW: CS/FAA 25.853 Appendix F Part 2
£500 per test
60 second vertical burns IAW: CS/FAA 25.853 Appendix F Part 1(a) (1) (i)
15 second horizontal burn test IAW CS/FAA 25.853 Appendix F Part 1 (a)(1) (iv)
30 second, 60 degree burn test: CS/FAA 25.1713(c) Appendix F Part 1(a)(3)&(b)(7)
60 second, 45 degree single wire burn test: IEC 60332-1-2, Edition 1-1 2015-07.45
From £45 per test
Oil burner for seat cushions burns test IAW: CS/FAA 25.853 Appendix F Part 2
£500 per test
48 hour turn around 7 days a week
All tests video recorded with live feed available. 24 hour turnaround available if requested with an additional 10% charge
All tests video recorded with live feed available. 24 hour turnaround available if requested with an additional 10% charge
Example of a Burns Test
Customer A delivers seating arm caps covered with a new leather and
refurbished with new foam for a 12 second vertical test, unfortunately these
items fail the test.
With over 200 of these items already manufactured the customer had few choices, either completely remanufacture the items or scrap the parts.
After accepting the challenge the Mix14 developed a liquid FR system (MX-PACE-01) that could be delivered to the bonding surfaces of the arm caps without the need to take the items part. After application, further testing showed full compliance with the required regulations.
This formula is now part of our available systems to assist any future
customer needs and exclusivley available at satto.aero